Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 105 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Updating Firmware 4–9 MN-CDM-425
g. Download the archive file to the temporary folder.
•
Once the EXE or ZIP hyperlink is selected, the ‘ File Download ’ window
opens and prompts selection of [Open] or [Save] :
o
Click [Open] to turn over file extraction to the user-supplied utility
program. Be sure to extract the firmware files to the “ temp ”
folder created earlier.
o
Click [Save] to open the ‘ Save As ’ window. Be sure to select
and [Save] the archive *.exe or *.zip file to the “ temp ” folder
created earlier.
o
Otherwise, click [Cancel] to quit and exit the file download
process.
Figure 4-9. Archive File Transfer to Temporary Folder
2. Extract the firmware files from the archive file.
•
(If not already done with File Download > [Open] ) Extract the firmware files from
the downloaded *.exe or *.zip archive file with the user-supplied utility program:
o
Double-click on the archive file name, and then follow the prompts
provided by the user-supplied utility program.
For the Base Modem update, a minimum of two files should be
extracted:

FW-0021103*_CDM-425_#.#.#.bin – The base modem bulk
image file (where ‘*’ is the revision letter).

FW-0021103*_CDM425_ReleaseNotes_v#.#.#. pdf (or a
variation of this filename, where “###” is the firmware version).
For the IP Packet Processor update, a minimum of two files should be
extracted:

Without AES – FW-0021125*. bin (where ‘*’ is the revision letter)
– or –

With AES – FW-0021126x.bin (where ‘*’ is the revision letter).

FW0021125*_CDM425_ReleaseNotes_V#.#.#.pdf (or a
variation of this filename, where “#.#.#” is the firmware version).
3. Confirm availability of the firmware files in the temporary folder. There are several ways
you may view the contents of the temporary folder on a Windows-based PC:
a. From the Windows Desktop:
•
Double-left-click the “ temp ” folder saved to the Windows Desktop.
•
Use Windows Explorer to locate, and then double-left-click the “ temp ”
folder.
•
Use the Browse window ( [Start] > ...Run > [Browse] ) to locate, and
then double-click the “c:\temp” folder.