Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 115 / 744

CDM-425 Advanced Satellite Modem
Revision 0
FAST Activation Procedure 5–3 MN-CDM-425
C. Use the
▲▼
arrow keys to scroll through the list of available FAST options. Options are
identified as “ Installed ” or “ Not Installed ” as shown in this example:
FAST: View options: 01 (

)
Any option identified as “ Not Installed ” may be purchased as a FAST upgrade.
3. Contact Comtech EF Data Product Support to order features:
A. Provide the unit Serial Number to the Product Support representative.
B. Identify and purchase the desired FAST option(s).
C. Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and the FAST
option activation instructions.
When a FAST Access Code is obtained from Comtech EF Data, it will be
for a specific option register. The FAST options are linked to two option
registers:
•
Register1 is for Data Rate, L-Band, and Framing options.
•
Register2 is for Modulation type and Packet Processor options.
4. Activate your purchased FAST features.
A. You must make sure you are active in the proper register.
From the SELECT: FAST

OPTIONS submenu, use the
◄ ►arrow keys to select
Set
Register1 or Set Register2 . Press ENTER .
FAST options: View Options
Set Register1 Set Register2 (

)
B. Use the
▲▼◄ ►
arrow keys to carefully enter each digit for your register-specific 20-
character FAST Access Code. Press ENTER when done.
FAST: Set register#: Enter code below
88888888888888888888 then [ENTER] (

)
The modem responds with “ Configured Successfully ” if the FAST upgrade is accepted;
the modem then resets to its newly-incorporated default configuration.