Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 183 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Front Panel Operation 6–65 MN-CDM-425
You must follow these rules when creating or adding a VLAN table entry:
•
The VLAN ID (0001-4095) must be unique – it cannot be a duplicate of any previously
assigned VLAN ID, including PVIDs in the VLAN ID table.
•
If a port is not in Trunk Mode (PortMode = Trunk), the behavior attribute for each port
may be set as
Tagged or Filtered.
For any VLAN ID (Trunk Mode) created, at a minimum, one port must be
defined as ‘Tagged’.
You must follow these rules when assigning PVIDs:
•
The PVID (0001-4095) must be unique – it cannot be a duplicate of any previously
assigned VLAN ID, including PVID. The only exception to this rule is that the default
value 0001 may be assigned as the PVID for all ports.
•
If a port is in Access Mode (Port Mode = Access), the behavior attribute for each port
may be set as
Untagged or Filtered.
•
PVIDs are automatically ENTER ed into the VLAN ID Table when changed.
•
When a new PVID entry is added to the VLAN ID Table, the “other” ports will default to
Filtered .
•
When a PVID is changed, the entry in the VLAN ID Table for that port will change to
Filtered . If the rest of the ports are also Filtered , then delete that entry. If any other port
has been marked Tagged , leave the entry in the table.
The following examples of the VLAN port configuration and ID tables are provided for user
reference:
VLAN Port Configuration
Port Port Mode Native VLAN ID
1 Trunk N/A
2 Trunk N/A
3 Trunk N/A
4 Access 3400
VLAN ID Table
VLAN ID Port 1 Port 2 Port 3 Port 4
344 Tagged Filtered Tagged Filter
454 Filtered Tagged Tagged Untagged (Access mode)
3400 Filter Tagged Filter Untagged (Access mode)