Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 492 / 744

CDM-425 Advanced Satellite Modem
Revision 0
ODU (Transceiver, BUC, LNB) Operation 10–2 MN-CDM-425
10.2 ODU Remote Control Address Setup
•
Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
•
Appendix H. EDMAC CHANNEL
The ODU, as connected to a CDM-425 through FSK (Frequency Shift Keying), can be remotely
monitored and controlled through the use of ODU commands and queries issued via serial
remote control or with the Telnet Command Line Interface (CLI).
The address of the ODU is set up as follows:
•
For Local-End ODUs:
o
Use the Modem’s RC A 1 for a Standalone Unit or the Online Unit in a
1:1 Redundancy System;
o
Use the Modem’s RC A 2 for the Offline Unit in a 1:1 Redundancy
System.
•
For Distant-End ODUs in an EDMAC setup:
o
Use the EDMAC Slave Address (ESA) Range +4 for Standalone Unit or the
Online Unit in a 1:1 Redundancy System;
o
Use the EDMAC Slave Address (ESA) Range +5 for the Offline Unit in a 1:1
Redundancy System.