Comtech EF Data CDM-425 Скачать руководство пользователя страница 495

Страница: 495 / 744

CDM-425 Advanced Satellite Modem

Revision 0

ODU (Transceiver, BUC, LNB) Operation

10–5

MN-CDM-425

10.3.3

SELECT: (Main) Menu Overview

SELECT: Configuration Test Monitor

Info Store/Ld Utility ODU FAST

(



)

Press

ENTER

CLEAR

to immediately access the

SELECT:

menu screen from the opening

screen. From any nested menu, press

CLEAR

repeatedly until this screen reappears.

The table that follows identifies each menu branch available from the

SELECT:

menu and its

content section in

Chapter 6. FRONT PANEL OPERATION

. ODU M&C is available for selection

as noted:

Menu Branch

See Chapter

Section...

Function

Configuration 6.2.1

Use to fully configure the modem and the ODU alarm masks.

The Tx, Rx, and Mask submenus incorporate ODU functionality. For

detailed information see the following sections in this chapter:

10.3.3.1.1 CONFIG: Tx →Freq and CONFIG: Rx →Freq

10.3.3.1.2.1 CONFIG: Mask →BUC

10.3.3.1.2.2 CONFIG: Mask→LNB

Test

6.2.2

Use to configure the modem into one of several Test modes, and

configures/monitors the BER Tester.

Monitor

6.2.3

Use to monitor the current status of the modem and ODUs and view the log

of stored events for the modem.

For detailed information, see to Sect. 10.3.3.2 (SELECT: MONITOR) Live-

Alarm Menus in this chapter.

Info

6.2.4

(Information) Use to view information on the modem without having to

access the Configuration screens.

Store/Ld

6.2.5

(Store/Load) Use to store and retrieve up to 10 different modem

configurations.

Utility

6.2.6

Use to perform miscellaneous functions – e.g., setting the Real-Time Clock,

adjusting the VFD brightness, etc.

ODU

6.2.7 (Summary)

(Outdoor Unit) For detailed information, see Sect. 10.3.3.3 (SELECT: ODU)

Menu Branches in this chapter.

FAST

6.2.8

(Fully Accessible System Topology) Use to configure available options –

e.g., extended data rates, interfaces, etc. Contact Comtech EF Data

Product Support for details.

From the top

SELECT:

menu, use the

◄ ►

arrow keys to select

Configuration

ODU

, and then

press

ENTER

Содержание CDM-425









































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CDM-425

Отзывы:

Похожие инструкции для CDM-425

Бренды по названию

Популярные бренды

Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CDM-425

Отзывы:

Похожие инструкции для CDM-425

Бренды по названию

Популярные бренды