Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 154 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Front Panel Operation 6–36 MN-CDM-425
CONFIG: D&I

Drp-Type or Ins-Type
The available Frame Format types for Drop or Insert are:
Frame Format (Type) Description
T1-D4 T1 D4 Framing
T1-ESF T1 Extended Super Frame Framing
E1-CCS E1 Common Channel Signaling Framing
E1-CAS R1 Channel Associated Signaling Framing
Use the
▲▼ arrow keys to select the desired Drop-Type or Insert-Type. Press
ENTER .
CONFIG: D&I

(Drop or Insert) Chan/TS (Channel Timeslots)
Drp-Ch: 1
TS: 01
Ins-Ch: 1
TS: 01
Use the
▲▼ arrow keys to select the number of Drop or Insert Channel Timeslots, from
na to 24 .
Press ENTER .
The number of available Channel Timeslots depends on the data rate:
•
If the data rate is 1920 kbps and the framing is D&I, then only the E1 formats are
available and the
Chan/TS menus are disabled. This is the ‘Fixed Channel Mode’ where
all timeslots are allocated in order. D&I++ does not have ‘Fixed Channel Mode’.
•
If the framing is D&I and Drop/Insert Type is E1-CAS, Timeslot 16 is used solely for CAS
signaling and therefore may not be allocated for traffic data.
CONFIG: D&I

Loop
Select Loop to tie Drop Data Out (DDO) to Insert Data Input (IDI) without having to externally
connect cables to these ports. Use the
▲▼ arrow keys to select
Y (es) or N (o) for the Loop
feature.