Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 215 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Front Panel Operation 6–97 MN-CDM-425
6.2.6.4 Utilities: LED
Front Panel LED Test: Enabled
(Enable,Disable) (

)
Use the
▲▼ arrow keys to select
Enable , and then press ENTER to execute a test of all of the
LEDs on the front panel. Normal operations resume upon completion of the test.
6.2.6.5 Utilities: Redundancy
Redundancy:
Traffic-IP-Addr/Range 1:1 1:N
Use the
▲▼ arrow keys to select
Traffic-IP-Addr/Range, 1:1, or 1:N . Press ENTER .
6.2.6.5.1 Utilities: Redundancy

Traffic-IP-Addr/Range
Traffic IP address/Range
192.168.001.001/24 (

)
When the modem is part of a 1:1 or 1:N redundancy application, use the
◄ ►
arrow keys to
select a digit to edit the Traffic IP Address and range.
Then, use the
▲▼ arrow keys to change that digit. Press
ENTER .
6.2.6.5.2 Utilities: Redundancy

1:1
Press ENTER key to force Unit into
Standby (1:1 only)
For use when the modem is part of a 1:1 redundancy application (e.g., via a CRS-170A L-Band or
CRS-180 70/140 MHz 1:1 Redundancy Switch) and this unit is currently
Online , press ENTER to
cause the unit to switch to Standby (i.e., go Offline ).