Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 711 / 744

CDM- Advanced Satellite Modem
Revision 0
Appendix L L–1 MN-CDM-425
Appendix L. IP Sub-Mux
L.1 Overview
Subsystem Multiplex – referred to throughout this manual as Sub-Mux – is a secondary
framing structure that combines IP traffic with any currently available combination of framing
and interface type (excluding IP itself). The composite data rate to the modulator and from the
demodulator is referenced to the primary, non-IP interface rate by a specific ratio selected by
the user.
L.2 Available Ratios
The IP portion of the modem traffic can be either smaller or larger than the primary interface by
the following ratios:
Table L-1. Subsystem Multiplex Available Ratios
Ratio IP Portion of Modem Traffic
1/59 IP traffic is one-fifty-ninth the primary
1/39 IP traffic is one-thirty-ninth the primary
1/19 IP traffic is one-nineteenth the primary
1/9 or 9 IP traffic is one-ninth the primary, or 9 times the primary
1/8 or 8 IP traffic is one-eighth the primary, or 8 times the primary
1/7 or 7 IP traffic is one-seventh the primary, or 7 times the primary
1/6 or 6 IP traffic is one-sixth the primary, or 6 times the primary
1/5 or 5 IP traffic is one-fifth the primary, or 5 times the primary
1/4 or 4 IP traffic is one-fourth the primary, or 4 times the primary
2/7 or 7/2 IP traffic is two-sevenths the primary, or 3.5 times the primary
1/3 or 3 IP traffic is one-third the primary, or 3 times the primary
2/5 or 5/2 IP traffic is two-fifths the primary, or 2.5 times the primary
3/7 or 7/3 IP traffic is three-sevenths the primary, or 2.33

times the primary
1/2 or 2 IP traffic is one-half the primary, or 2 times the primary