background image

 1

Hotwire

 7974, 7975, 7976, 7984, 7985, and 7986

Standalone Termination Unit

 

 

Installation Instructions

Document Number 7970-A2-GN10-00

August 1999

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com. Select
Library 

 Technical Manuals 

 Hotwire DSL & MVL Systems.

Select the following document:

7970-A2-GB20
Hotwire 7974, 7975, 7976, 7984, 7985, and 7986 Standalone Termination Unit
User’s Guide

To request a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Be sure to register your warranty at www.paradyne.com/warranty.

Document Feedback

We welcome your comments and suggestions about this document. Please mail them
to Technical Publications, Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773,
or send e-mail to [email protected]. Include the number and title of this
document in your correspondence. Please include your name and phone number if you
are willing to provide additional clarification.

Содержание Hotwire 7974



































Отзывы: