COMPRO RS-3232, Руководство пользователя

Страница: 62 / 128

Enable/Disable Recording Schedules Set Up a Recording Schedule
Compro RS-3232 - User's Manual
7-4
5. Make sure “Non-stop Recording” is selected from the “Operation” drop-down list. Then, press “Add” to
add a new schedule.
6. Click [OK] to exit the configuration console.
7. In the system panel, click the “Start all" icon (the icon shall then turn red) to make your recording
schedule take effect.
Figure 7-4. Schedule non-stop recording
Schedule Event-Based Recording
You can make ComproView® record video only when a particular type of event is detected within a
specified time range:
1. Enter the system configuration console by clicking on the setup icon ( ) and then choose “Setup”
from the fly-out menu.
2. Go to the "Schedule" tab.
3. Click on the channel number to choose a channel. The selected channel row will be highlighted in
light blue.
4. In the Time section, manually put in the start time and end time. Alternatively, you can click on the
timeline to set the start time, and then drag the time bar to the point in time when you want the
recording to end and then click again to set the end time. (You can use the horizontal scroll bar to
adjust the width of the timeline.) To update your start/end time, simply click and drag on the timeline
again.
5. Choose a method of event recording from the “Operation” drop-down list. Then, go ahead and press
“Add” to add a new schedule.
6. Click [OK] to exit the configuration console.
7. In the system panel, click the “Start all" icon (the icon shall then turn red) to make your recording
schedule take effect.