manualshive.com logo in svg

COMPRO RS-3232, Руководство пользователя

Поделиться
Скачать
COMPRO RS-3232 Скачать руководство пользователя страница 15

Hardware Connections

Set Up RAID Level (Optional)

Chapter 3: Getting Started

3-3

Figure 3-5. Choosing physical disks

6.  After that, press Enter twice to use default strip size and capacity setting. Then press Enter again to 

proceed with volume creation. Press the Y key when prompted with a warning message to confirm the 
RAID volume creation.

Figure 3-6. Confirming the creation

7.  Exit the RIAD configuration interface by choosing Exit. 

8.  Start up the system and follow the instructions of the Compro setup wizard to run a disk management 

tool. Then go ahead to create a new disk volume using this tool and complete the setup. 

!

Important:

• 

RS-3232 does not support a hard drive with greater than 2TB. 

• 

If you intend to use RAID 1, it is recommended to install two identical 
hard drives in the RS-3232.

• 

Compro does not guarantee full compatibility across all hard drives. 
Please select a compatible hard drive model from www.comprousa.
com.

Hardware Connections

Power Connection

Connect the power cord to the power cord inlet on the unit’s rear panel. Then connect the other end of the 
power cord to a power outlet.

Network Connection

Use a RJ-45 Ethernet cable to connect the LAN port 1 (located next to the VGA connector) of the unit to 
an available Ethernet port on your network router/hub. In default mode, the RS-3232 is configured to 
automatically obtain an IP address from your network router or from a DHCP server on your LAN network. 
If the unit fails to obtain an IP address via DHCP, please manually assign an IP address to the unit.

Содержание RS-3232

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды