Compaq Deskpro AP240, Справочное руководство

Страница: 83 / 216

4-2 Installation Guidelines
Writer: Debbie Thomson Saved by: Lydia Sanchez Saved date: 07/30/99 4:49 PM
Pages: 7 Words: 1342 Template: c:\word7\templates\comm.dot
File Name d-ch4.doc Part Number 158415-001
2. If the workstation is already on, turn it off and disconnect
the power cord from the wall outlet.
!
WARNING:
To reduce the risk of personal injury from electrical
shock and/or hot surfaces, be sure to disconnect the power cord
from the wall outlet, and allow the internal system components to
cool before touching.
!
WARNING:
To reduce the risk of electrical shock, fire, or damage
to the equipment, do not plug telecommunications/telephone
connectors into the network interface controller (NIC) receptacles.
CAUTION:
Static electricity can damage the electronic
components of the workstation or optional equipment. Before
beginning these procedures, ensure that you are discharged of
static electricity by briefly touching a grounded metal object. Refer
to Appendix B, “Electrostatic Discharge,” for more information.
3. Open the workstation by removing its outside cover. Refer
to the procedures for removing the workstation cover or
access panel.
4. Install any optional equipment. Refer to the applicable
sections of this guide or to the documentation provided
with the optional equipment for instructions.
5. Replace the workstation cover.
6. Turn on the monitor, workstation, and any devices you
want to test.
7. Reconfigure the workstation, if necessary. Refer to Chapter
2, “Software,” for instructions about using Computer
Setup.
If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock and enable the cover removal
sensor.