Compaq Deskpro AP240, Справочное руководство

Страница: 102 / 216

5-14 Upgrading the Desktop Workstation
Writer: Debbie Thomson Saved by: Lydia Sanchez Saved date: 08/25/99 6:51 PM
Pages: 32 Words: 4087 Template: c:\msoffice\templates\comm.dot
File Name d-ch5.doc Part Number 158415-001
Removing or Installing a PCI or ISA Card
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock and disable the Smart Cover
Sensor.
2. Shut down the operating system properly, turn off the
workstation and any external devices, then disconnect the
power cord from the power outlet.
3. Remove the workstation cover.
4. Raise the expansion card cage by lifting and locking the
two green levers. You do not need to remove the cage from
the chassis.
If installing an expansion card, skip to step 10.
5. To remove an expansion card, disconnect any cables
attached to the expansion card.
6. Remove the screw at the side of the expansion slot.
✎
You will need to slide the system board tray backward a
short distance to access the screws for the first and
second slots.
7. Hold the card at each end and carefully rock it back and
forth until the connectors pull free from the slot. Be sure
not to scrape the card against other components.
8. Store the card in anti-static packaging.
9. Install an expansion slot cover or new expansion card to
close the open slot.
If not installing a new expansion card, skip to step 14.
10. To install a new expansion card in an open slot, remove the
expansion slot cover.
✎
You will need to slide the system board tray backward a
short distance to access the screws for the first and
second slots.