Compaq Deskpro AP240, Справочное руководство

Страница: 37 / 216

Reference Guide 2-3
Writer: Your Name Saved By: Lydia Sanchez Saved Date: 07/30/99 12:34 PM
Pages: 20 Words: 3935 Template: c:\word7\templates\comm.dot
File Name d-ch2.doc Part Number 158415-001
Method 2 (Manually Converting to NTFS)
Before you manually convert to NTFS, you must have the
following:
■ A bootable MS-DOS diskette (OSR2 or later) having IDE
CD support or network support and containing the
following MS-DOS utilities: FDISK, FORMAT, and
XCOPY.
■ Microsoft Windows NT Workstation 4.0 installation CDs
and the Service Pack 4 CD, or appropriate network share.
■ Appropriate Compaq device drivers, located at
www.compaq.com.
1. Insert the bootable MS-DOS diskette into the diskette drive
and turn on or restart the workstation.
2. At the MS-DOS Prompt, run FDISK and press Enter.
3. When prompted, select large drive support.
4. From the FDISK main menu, select “Delete partition or
logical DOS drive” (Option 3) and press Enter.
5. Select the appropriate option(s) to delete existing partitions
or logical drives. The order in which FDISK will allow
deletion is as follows:
A) Logical drives lowest drive letter first (d: … z:)
B) Extended partition(s)
C) Primary partition
D) Non-DOS partition(s) (at any time)
After completing steps 1-5, install the operating system as
described in the following section.