Compaq Deskpro AP240, Справочное руководство

Страница: 205 / 216

Reference Guide G-3
Writer: Your Name Saved by: Lydia Sanchez Saved date: 07/30/99 4:33 PM
Pages: 8 Words: 1297 Template: c:\word7\templates\commapp.dot
File Name e-appg.doc Part Number 158415-001
4. Locate the header and jumper labeled E49.
Location and Identification of the Password Jumper on the System Board (Intel 820
Chipset)
5. Remove the jumper from pins 1 and 2. Place the jumper
over pin 2 only, in order to avoid losing it.
6. Replace the workstation cover or access panel.
7. Reconnect the external equipment.
8. Plug in the workstation and turn on power. Allow the
operating system to start. This clears the current passwords
and disables the password features.
9. To re-enable the password features, repeat steps 1-4, then
replace the jumper on pins 1 and 2.
Repeat steps 6-8, then establish new passwords. Refer to
Chapter 2, “Software,” for Computer Setup (F10 Setup)
instructions.