Compaq Deskpro AP240, Справочное руководство

Страница: 187 / 216

Reference Guide E-1
Writer: Your Name Saved by: Lydia Sanchez Saved date: 08/26/99 8:59 AM
Pages: 13 Words: 2459 Template: c:\word7\templates\commapp.dot
File Name e-appe.doc Part Number 158415-001
appendix
E
POST E
RROR
C
ODES
Error Codes
This chapter lists the error codes that you may encounter during
the Power-On Self-Test (POST) or workstation restart, the
probable source of the problem, and what steps you can take to
resolve the error condition.
✎
POST error codes vary depending on workstation model.
Power-On Self-Test Messages
Message Beeps* Probable Cause Recommended Action
101-Option ROM
Error 1L, 1S System ROM checksum. 1. Verify the correct ROM
2. Flash the ROM if needed.
3. If an expansion card was recently
added, remove it and see if the
problem remains.
4. If the message disappears, there
may be a problem with the
expansion card.
5. Replace the system board.
102-System Board
Failure None DMA, timers, etc. 1. Clear CMOS.
2. Remove expansion boards.
3. Replace the system board.
103-System Board
Failure None DMA, timers, etc. 1. Clear CMOS.
2. Remove expansion boards.
3. Replace the system board.
* L = Long, S = Short
Continued