Compaq Deskpro AP240, Справочное руководство

Страница: 122 / 216

6-2 Upgrading the Minitower Workstation
Writer: Debbie Thomson Saved by: Lydia Sanchez Saved date: 09/09/99 9:33 AM
Pages: 30 Words: 3654 Template: c:\msoffice\templates\comm.dot
File Name d-Ch6.doc Part Number 158415-001
5. Press in at the topmost screw area to release the manual
catch and use the hand hold to slide the panel to the back of
the workstation about 1-inch (2.5-cm), then lift it out and
up to remove.
Removing the Workstation Access Panel
✎
The configuration label located inside the workstation
access panel provides additional information, including
information about diagnosing workstation conditions
using the power and hard drive LEDs.
Raising the Expansion Card Cage
The expansion card cage, with green lift levers, allows quick
removal of expansion cards. In most cases, you will not need to
completely remove the expansion card cage from the chassis.
!
WARNING:
Before removing the workstation access panel,
ensure that the workstation is turned off and that the power cord is
disconnected from the electrical outlet.