Compaq Deskpro AP240, Справочное руководство

Страница: 123 / 216

Reference Guide 6-3
Writer: Debbie Thomson Saved By: Lydia Sanchez Saved Date: 09/09/99 9:33 AM
Pages: 30 Words: 3654 Template: c:\msoffice\templates\comm.dot
File Name d-Ch6.doc Part Number 158415-001
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock and disable the Smart Cover
Sensor.
2. Shut down the operating system properly, then turn off the
workstation and any external devices.
3. Disconnect the power cord from the power outlet.
4. Remove the workstation access panel and turn the
minitower on its side, with the open side up.
5. Lift the two green levers on the top of the expansion card
cage to their upright position to electrically disconnect it
from the system board. This is service position 1.
6. Raise the expansion card cage to engage the built-in catch
that holds the cage up and away from the system board.
This secures the cage and prevents it from damaging
components on the system board. This is service
position 2.
Raising the Expansion Card Cage
✎
To reconnect the expansion card cage to the system
board, first ensure that the system board is completely
installed in the chassis. Slightly lift the expansion card
cage and release the built-in catch to lower it into service
position 1; then, rotate the levers to their original
positions to lock the assembly in place.