manualshive.com logo in svg

Compaq AlphaServer DS20, Руководство по обслуживанию

Сервисный мануал Compaq AlphaServer DS20 доступен для бесплатного скачивания на manualshive.com. Получите подробное руководство по эксплуатации этого продукта, чтобы обеспечить его правильную работу. manualshive.com - ваш надежный источник руководств.

Поделиться
Скачать
background image

Notice

The information in this publication is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL
OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.

This publication contains information protected by copyright. No part of this publication may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.

The software described in this document is furnished under a license agreement or
nondisclosure agreement and may be used or copied only in accordance with the terms of the
agreement.

© 1999 Digital Equipment Corporation.

All rights reserved. Printed in the U.S.A.

COMPAQ and the Compaq logo are trademarks or registered trademarks of Compaq Computer
Corporation.  AlphaServer, DIGITAL, OpenVMS, and StorageWorks are trademarks or
registered trademarks of Digital Equipment Corporation.  Microsoft, Windows, and Windows
NT are registered trademarks of Microsoft Corporation.  UNIX is a registered trademark in the
U.S. and other countries, licensed exclusively through X/Open Company Ltd.  Other product
names mentioned herein may be trademarks and/or registered trademarks of their respective
companies.

Digital Equipment Corporation now owned by Compaq Computer Corporation.

FCC Notice: The equipment described in this manual generates, uses, and may emit radio
frequency energy. The equipment has been type tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of FCC Rules, which are designed to provide
reasonable protection against such radio frequency interference. Operation of this equipment in
a residential area may cause interference, in which case the user at his own expense will be
required to take whatever measures are required to correct the interference.

Shielded Cables: If shielded cables have been supplied or specified, they must be used on the
system in order to maintain international regulatory compliance.

Warning! This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.

Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei
Betrieb dieses Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für
entsprechende Gegenmaßnahmen verantwortlich ist.

Avertissement!  Cet appareil est un appareil de Classe A. Dans un environnement résidentiel,
cet appareil peut provoquer des brouillages radioélectriques. Dans ce cas, il peut être demandé à
l'utilisateur de prendre les mesures appropriées.

Содержание AlphaServer DS20























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AlphaServer DS20

D-Link DSL-2730B Technical Support preview
DSL-2730B
Бренд: D-Link Страницы: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Бренд: D-Link Страницы: 2
Patton electronics 3210 Specification Sheet preview
3210
Бренд: Patton electronics Страницы: 2
IBM B50 Service Manual preview
B50
Бренд: IBM Страницы: 198
Accelerated 6330-MX User Manual preview
6330-MX
Бренд: Accelerated Страницы: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Бренд: Accelerated Страницы: 4
NAIM HDX-SSD - Quick Start Manual preview
HDX-SSD -
Бренд: NAIM Страницы: 16
Hamlet HXDU2RFID User Manual preview
HXDU2RFID
Бренд: Hamlet Страницы: 10
H3C UniServer BT716F User Manual preview
UniServer BT716F
Бренд: H3C Страницы: 44
IBM 9123710 - eServer OpenPower 710 Introduction Manual preview
9123710 - eServer OpenPower 710
Бренд: IBM Страницы: 70
TerraMaster F4-210 Fundamentals And Preliminaries preview
F4-210
Бренд: TerraMaster Страницы: 13
Comet Labs GS8+ User Manual preview
GS8+
Бренд: Comet Labs Страницы: 11
IBM P 615 series Service Manual preview
P 615 series
Бренд: IBM Страницы: 491
Teldat G1N Installation Manual preview
G1N
Бренд: Teldat Страницы: 23
Ubiquiti EdgeRouter X Quick Start Manual preview
EdgeRouter X
Бренд: Ubiquiti Страницы: 20
Hame 434T User Manual preview
434T
Бренд: Hame Страницы: 37
M-Systems Section II User Manual preview
Section II
Бренд: M-Systems Страницы: 22
Acard AEC-6896S User Manual preview
AEC-6896S
Бренд: Acard Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды