manualshive.com logo in svg

Compaq AlphaServer DS20, Руководство по обслуживанию, Страница: 173 / 182

Поделиться
Скачать
Compaq AlphaServer DS20 Скачать руководство пользователя страница 173

Firmware Update   

C-15

Before starting LFU, download the update files from the Internet.  You will need the
files with the extension .SYS. Copy these files to your local MOP server’s MOP load
area.

➊

Select the device from which firmware will be loaded. The choices are the CD-
ROM, the internal floppy disk, or a network device. In this example, a network
device is selected.

➋

Select the file that has the firmware update, or press Enter to select the default
file. The file options are:

AS1400FW
(default)

SRM console, AlphaBIOS console, and I/O adapter
firmware.

AS1400CP

SRM console and AlphaBIOS console firmware only.

AS1400IO

I/O adapter firmware only.

In this example the default file, which has both console firmware (AlphaBIOS
and SRM) and I/O adapter firmware, is selected.

➌

Use the LFU list command to determine the revision of firmware in a device
and the most recent revision of that firmware available in the selected file. In
this example, the resident firmware for each console (SRM and AlphaBIOS)
and I/O adapter is at an earlier revision than the firmware in the update file.

Continued on next page

Содержание AlphaServer DS20























































































































































































Отзывы:

Нет отзывов