CommPact Control system, Руководство по установке

Страница: 46 / 148

7 Devices
CommPact Installation Manual
42
7.3.1. Zone Type
The zone type defines the type of alarm the system generates when the detector is tripped.
To program a zone type:
1.
From the Programming menu, select Devices, Zones [911].
2. Select the detector you want to program.
3. From the detector’s sub-menu, select Zone Type [#02].
4. Select one of the following zone types:
• Normal
• Entry/Exit
• Follower
• Panic
• Medical
• Fire
• 24H
• 24Hr-X (future option)
• Gas
• Flood
• Environmental
• No Motion
• Not Used
For a detailed explanation on the function of each zone type, see p. 139, Appendix D: Event Table.
7.3.2. Set
The Set option allows you to define the setting methods in which the zone is included.
Each zone can be assigned to Full Setting and/or to Part and/or to Perimeter Setting in any
combination.
The following table summarizes set options:
Table 7-1: Set Options
Set Description
1 (F) The zone is included in Full setting.
2 (P) The zone is included in Part setting.
3 (PE) The zone is included in Perimeter setting.
To program the Set option:
1.
From the Programming menu, select Devices, Zones [911].
2. Select the zone you want to program.
3. From the zone’s sub-menu, select Set [#03]; the zone’s current Set setting is displayed.
4. Use the keys 1, 2 and 3 to toggle the current setting.
It is not necessary to program this option for Panic, Medical, Emergency, Fire, 24Hr and
Gas, Flood and Environmental zones.
7.3.3. Descriptor
For information on device descriptor editing, see p. 39, 7.1 Device Descriptors