CommPact Control system, Руководство по установке

Страница: 112 / 148

Appendix B: Transmitter Installation
CommPact Installation Manual
108
Operation
Mode Description Activation
Test Striking the protected door or
window frame indicates whether the
impact would generate an alarm. Activated automatically when you press the
Tamper switch to save the adjustment
setting. Test mode may be terminated by
pressing the Tamper switch or is
automatically terminated after 5 minutes.
Normal Striking the protected door or
window frame sends an alarm
transmission to the receiver.
Regular operation mode of detector. In this
mode, alarm activation is limited to one
alarm approximately every 4 minutes.
Smoke Detector (EL-2703)
The EL-2703 is a single station, photoelectric smoke detector with a built-in supervised wireless
transmitter.
When sufficient smoke is detected, or the test feature is operated, the detector will sound its alarm
horn and the transmitter will send an ALARM message. The Alarm output in the receiver will
remain activated until the alarm condition clears.
The smoke alarm base lock discourages unauthorized removal of the smoke alarm by requiring a
screwdriver to remove the alarm from the base.
The smoke alarm provides the following signals to the control panel:
•
Alarm
•
Alarm restore
•
Low battery
•
Tamper
•
Supervision
This smoke detector is designed for use in a single residential unit only, which means
that it should be used inside a single family home or apartment. It is not meant to be
used in lobbies, hallways, basements, or another apartment in multi-family buildings,
unless there are already working detectors in each family unit. Smoke detectors, placed
in common areas outside of the individual living unit, such as on porches or in hallways,
may not provide early warning to residents. In multi-family buildings, each family living
unit should set up its own detectors.
This detector is not to be used in non-residential buildings. Warehouses, industrial or
commercial buildings, and special purpose non-residential buildings require special fire
detection and alarm systems. This detector alone is not a suitable substitute for complete
fire detection systems for places where many people live or work, such as hotels or
motels. The same is true of dormitories, hospitals; nursing homes or group homes of any
kind, even if they were once single - family homes. Please refer NFPA 101, the Life Safety
Code, NFPA71, 72A, 72B, 72C, 72D, and 72E for smoke detector requirements for fire
protection in buildings not defined as “households”.