CommPact Control system, Руководство по установке

Страница: 30 / 148

4 Advanced System Operation
CommPact Installation Manual
26
Code 32: Engineer Code
The Engineer code grants access to the Programming menu and the Service menu. Additionally,
this code enables you to view and clear the Event Log.
The default Engineer code is 1111. Change this code immediately after installing
the system!
4.4.1. Editing User Codes
To edit a user code:
1.
From the main menu, select User Codes [4].
2. Select the code you want to edit.
3. From the code’s sub-menu, select Edit Code [#1]; the 4-digit code is displayed with the
cursor flashing on the first digit.
4. Edit the code.
5. Press ' √ʹ; the new code is stored in the memory.
If you enter a code that is identical to an existing user code, the Control System sounds an
error tone and the new code is not accepted.
4.4.2. Deleting User Codes
To delete a user code:
1.
From the main menu select, User Codes [4].
2. Select the code you want to delete.
3. From the code’s sub-menu, select Edit Code [#1]; the 4-digit code is displayed with the
cursor flashing on the first digit.
4. Enter 0000.
5. Press ' √ʹ; the code is deleted.
The Engineer and Master codes cannot be deleted.
4.4.3. User Code Descriptors
Each user code can be assigned a 16-character descriptor. These descriptors help to identify users in
the event log and in SMS Follow-Me messages.
To edit a code descriptor:
1.
From the main menu, select User Codes [4].
2. Select a code.
3. From the code’s sub-menu, select Descriptor [#2].
4. Edit the descriptor using the alphanumeric keypad.
5. Press ' √ʹ when you have finished editing.