manualshive.com logo in svg

Comelit KSW3207LU, Техническое руководство

Поделиться
Скачать
Comelit KSW3207LU Скачать руководство пользователя страница 51

System options
Technical reset

System options
Macro

51

Technical reset

This menu is used to enable the need for a technical reset for some faults and tamper events. If this flag is enabled, the 

TECHNICAL RESET command will be available in the “Maintenance” technical menu.

•  Robbery tec.reset: this menu is used to enable the need for a technical reset to reset the robbery alarm.

◊  The possible options are as follows: Enable/Disable

•  Tamper tec.reset: this menu is used to enable the need for a technical reset to reset the tamper alarm.

◊  The possible options are as follows: Enable/Disable

•  Alarm technical reset: this menu is used to enable the need for a technical reset to reset the alarm or the tamper alarm.

◊  The possible options are as follows: Enable/Disable

Macro

The Macro function is used to program a sequence of commands triggered by an activation event. The control panel can manage 
up to 10 Macros. Each macro can trigger 15 actions.
The actions may be as follows:

 

- Arm system

 

- Disarm system

 

- HH:MM (wait time in hours and minutes before continuing to the next step)

 

- MM:SS (wait time in minutes and seconds before continuing to the next step)

 

- Output ON (activation of an output)

 

- Output OFF (deactivation of an output)

 

- None

•  Select Macro (1-10): this menu entry is used to select the macro to be edited/created from the list.

◊  Macro description: this menu entry is used to enter a description for the macro.

System options
Robbery alarm

Robbery alarm

This menu entry is used to configure the type of reaction the system has to a robbery alarm command:

•  Silent al.: in this case no audible or visual signal will be generated, but the corresponding event will be sent to the 

configured recipients.

•  Audible al.: in this case the external sounder will be activated and the corresponding event will be sent to the configured 

recipients.

•  Personal al.: in this case the indoor sounder built into the control panel will be activated and the corresponding event will be 

sent to the configured recipients.

Содержание KSW3207LU

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды