Comau C3G Plus, Руководство по эксплуатации и обслуживанию, Страница: 149 / 266

C3G-DLO 32 DC 0,5 A OUTPUT MODULE
VME output module compatible with slave type interface capable of supporting 32 dc Outputs (0.5 A) with signalling through activation
of LEDs on the front panel when the outputs are active.
It may be added on the Control Unit rack starting from the first free slot at the right of the basic configuration modules.
The outputs are protected by fuse with specific indication on the monitoring system if it is tripped.
TECHNICAL CHARACTERISTICS
OUTPUT
Number of outputs
32
Number of common returns
4
Fuses (one for each common return)
5 A 125 V “Normal Blow” 5 x 20
Type of output
Transistor
Operating voltage
4.5 to 36.0 Vdc
Maximum output current with channel not activated
0.2 mA
Maximum voltage drop with channel active
1.8 Vdc
Maximum output current with all channels active
0.5 A @ ta = 25°C
0.4 A @ ta = 45°C
Protection against transients
Through diode
SIGNAL ALLOCATION
SIGNAL
RED
LED
CONN. J3 PIN
(MOD. FRONT)
CONN. X3X PIN
(CABINET BASE)
SIGNAL
RED
LED
CONN. J3 PIN
(MOD. FRONT)
CONN. X3X PIN
(CABINET BASE)
OUTPUT 1 A1 A1 A1 OUTPUT 17 C1 C1 C1
OUTPUT 2 A2 A2 A2 OUTPUT 18 C2 C2 C2
OUTPUT 3 A3 A3 A3 OUTPUT 19 C3 C3 C3
OUTPUT 4 A4 A4 A4 OUTPUT 20 C4 C4 C4
OUTPUT 5 A5 A5 A5 OUTPUT 21 C5 C5 C5
OUTPUT 6 A6 A6 A6 OUTPUT 22 C6 C6 C6
OUTPUT 7 A7 A7 A7 OUTPUT 23 C7 C7 C7
OUTPUT 8 A8 A8 A8 OUTPUT 24 C8 C8 C8
OUTPUT 9 B1 B1 B1 OUTPUT 25 D1 D1 D1
OUTPUT 10 B2 B2 B2 OUTPUT 26 D2 D2 D2
OUTPUT 11 B3 B3 B3 OUTPUT 27 D3 D3 D3
OUTPUT 12 B4 B4 B4 OUTPUT 28 D4 D4 D4
OUTPUT 13 B5 B5 B5 OUTPUT 29 D5 D5 D5
OUTPUT 14 B6 B6 B6 OUTPUT 30 D6 D6 D6
OUTPUT 15 B7 B7 B7 OUTPUT 31 D7 D7 D7
OUTPUT 16 B8 B8 B8 OUTPUT 32 D8 D8 D8
OUT 1
¸
8 COM. – AC A10 OUT. 17
¸
24 COM. – CC C10
OUT 1
¸
8 RET. – AR A12 OUT. 17
¸
24 RET. – CR C12
OUT 9
¸
16 COM. – BC B10 OUT. 25
¸
32 COM. – DC D10
OUT 9
¸
16 RET. – BR B12 OUT. 25
¸
32 RET. – DR D12
OUT. COM.
EARTH FUSE
FUSE – –
C3G
Plus
INTEGRATION GUIDE
01/0498 4-27
parallel
i/o
C3G-DLO
EXAMPLE OF CONNECTION