ComAp IM-NT, Справочное руководство

Страница: 175 / 328

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf,
©ComAp – June 2013
175
12.2.10 Group: Volt ctrl
12.2.10.1 Setpoint: Voltage gain
Group Volt Ctrl
Range [units] 0.0 .. 200.0 [%]
Related FW 3.0
Description This setpoint adjusts the gain factor (P-factor) of the voltage control PI loop.
The integration factor (I-factor) for the voltage control loop is adjusted by the
setpoint
Voltage int .
N
OTE
:
If this setpoint is set to 0 the regulation loop is disabled.
A
PPLICATION
V
OLTAGE GAIN AND
V
OLTAGE INT SETPOINTS ARE ACTIVE DURING
:
BTB
synchronization between “left” and “right” buses
N
OTE
:
When this setpoint is set to zero, the corresponding control loop is switched
OFF.
N
OTE
:
See the chapter Regulation loops overview for general information about
regulation loops and their adjustment.
12.2.10.2 Setpoint: Voltage Int
Group Volt Ctrl
Range [units] 0 .. 100 [%]
Related FW 3.0
Description This setpoint adjusts the relative integration factor (I-factor) of the voltage
control PI loop. The gain factor (P-factor) for the voltage control loop is
adjusted by the setpoint
Voltage gain .