7.8 Slice_Two Material
56
7.8.3.2 Setting for Two material2:
Select “CoLiDo Best”, “Multiple Extruder”, set one material is to print
product such as T1, another material is to print infill such as T2. Then click
“Save”to save the revsing to other name such as“CoLiDo Best 1”as
below picture.
Set the filament of
extruder2 to print
the infill.
7.8.4 Select the slice settings to slice.
7.8.4.1 Sllcie Two material 1:
Printer Setting:
CoLiDo support Duo
Printer Settings:
CoLiDo X3045 Duo 3D Printer
Extruder 1:
Extruder 2:
Select the nozzle and the platform
heating temperature base on the
filament you are using.
NOTE: The Extruder 1 and Extruder2
settings must be same.
Need select the higher required
temperature to the two Extruders.
TM
