TM
30
6.7 Change Filament
g
h
6.7.2 Select “Unload Filament” and proceed as below picture f~j.
a. Heating up the nozzle temperature to the setting temperature as picture i.
b. Once the temperature reach the setting temperature as below picture g,
the default extruder will work to auto unload its filament from the nozzle.
c. When unload ok, finish the filament unloading.
Press the receiver port lock and gently pull out the filament tube and
filament from the printer head.
i
Receiver port lock
f
j
