46
7.3 Slice_Single Color/Color Mixing
Step 5: Click “Slice with Slic3r”to slice the file
to generate g-code
7.3.3 After slice, you can see the estimated printing time and filament usage.
Also, you can see the printed shape of the object in the “3D View”.
Estimated printing time
Estimated filament usage
CoLiDo ABS_110
- For ABS Filament with nozzle temp 220
℃
and platform temp 110
℃
CoLiDo PLA_70
- For PLA Filament with nozzle temp 205
℃
and platform temp 70
℃
Step 4: Select the nozzle and the platform
heating temperature base on the
filament you are using.
NOTE: If the two filaments loaded in the printer are
different type, need select the heating temperature
base on the higher required temperature.
NOTE: You also can load the .GCO file which already sliced as above to review
the printing object.
TM
