TM
27
6.5 Prepare Menu
There are 8 submenus under “Prepare” as below picture I~III
：
1. Calibrate Mode → Printer calibration and test
(Refer to 6.1~6.4)
。
2. Choose Nozzle → Select the extruder1 or extruder2 to work.
(Refer to 6.6)
3. Disable Steppers→Unlock all motors, can move the position of the
platform and the printer head manually.
4. Auto Home→Printer Head will go to initial position.
5. Reset X Home→Printer Head return to X initial position. Y, Z position will
not change.
6. Change Filament →Load or unload filament, test filament (Refer to 6.7
）
7. Cooldown→Cool down the temperature of the platform and the nozzle to
normal temperature.
8. Color Mixing → Printing with proportional color, gradient color or
separation color. (Refer to 6.8)
I
II
III
