70
7.10 Repetier-Host Basic 3D Printing
1. 3D object can be adjusted such as scale down/up X/Y/Z, rotate X/Y/Z, copy,
mirror, autoposition and split before slice. After adjusting the object, It is
better to click “Center Object”.
2. For 3D printing layer by layer base on FDM process, we suggest printing
the model with OA structure. If printing the model with OB or OC structure
(Call Overhang Printing), the parallel or downward layer will fall down on
the model or on the platform due to no supporter to the layer. So, you need
add supporter for overhang object.
Remark:
OA – the structure is upward to stretch
OB – the structure is parallel to stretch
OC – the structure is downward to stretch
Save the adjusted
3D object
Add other 3D object
Autopostion
Scale up/down
Copy 3D model
to print more
Center the
object
View cross section
Rotate X/Y/Z
Mirror 3D model
Delete
Obejct Informations
3D model dimension
3. The 3D model must be closed surface or line to print base on FDM process.
If below message appeares, it is better to repair the object before printing.
Recommend repaire website: https://netfabb.azurewebsites.net.
TM
