16
5.6 Install Filament
Extruder2
Extruder Arm 2
Extruder1
TM
5.6.5 Gently pull the filament from the cartridge. Cut the filament tip flat
using scissor and make it straight for easy installation.
NOTE: Do not forcedly pull out the filament
from the cartridge in case the filament
disorder inside the cartridge.
5.6.6 Insert the two filament tubes to the top connector of the extruder 1 and
extruder 2 at the back of the printer to lock.
Filament Tube
5.6.7 Push down the extruder arm 1. Insert the filament into the bottom hole
of the extruder1 until it comes out from the other end of the filament tube.
Then, release the extruder arm 1.
Same process to insert filament to extruder2.
Other end of
Filament Tube
Extruder Arm 1
Bottom Hole
of Extruder1
Bottom Hole
of Extruder2
