64
TM
7.9 Printing using WIFI communication
7.9.2 Remote control
Step 1. Printer wireless relay setup
Refer 7.9.1.1 to connect printer with wifi, then open Google browser enter
10.10.11.1 to enter the CoLiDo 3D printer control web page. Under the
“WLAN Settings”select “STA” then enter the router user name and
password, click “Setup” to get STA IP as Fig. shown below.
Enter address 10.10.11.1
Enter the Wifi name and the wifi password
of the CoLiDo printer
Enter the Wifi router name and the wifi
password of the CoLiDo printer
After enter the name and the password, click Setup to get STA IP.
Default IP will show after click “Setup”,
if nothing shows, please reconnect
If login with mobile, please select “To PC” to setup relay mode.
