Safety Alert Symbol
CoLiDo USER MANUAL
Index
02
Chapter 1 Introduction
03
Chapter 2 Safety and Compliance
04
Interference of Radio and Television
05
5.1 Unpack CoLiDo Printer
09
08
5.2 Accessory Checklist
10
5.4 Unlock Printer Head and Heat Table
11
5.3 CoLiDo X3045 Duo 3D Printer Structure Illustration
12~14
5.5 Install Glass Platform
Chapter 3 Specification
06
Chapter 4 Print Principle
07
Chapter 5 Set up CoLiDo Printer
TM
15~17
5.6 Install Filament
6.2 Calibrate Mode
20~22
23~24
6.1 Main Menu
19
6.3 Nozzle & Filament Test
25~26
6.4 Print test with SD Card
27
6.5 Prepare Menu
28
6.6 Choose Nozzle
31~33
6.8 Color Mixing
Chapter 6 CoLiDo Printer Calibrate and Test
Chapter 8 Maintenance
78
Chapter 7 REPETIER-HOST Setup, Slice and Print
7.1 Install REPETIER-HOST
39~42
7.2 REPETIER-HOST Setup_Single Color/Color Mixing
43~44
7.3 Slice_Single Color/Color Mixing
45~46
Chapter 9 Troubleshoot
79~81
29~30
6.7 Change Filament
7.4 Printing_Single Color
7.5 Printing_Color Mixing
50~51
36~38
6.10 Print from SD Menu
34~35
6.9 Control Menu
47~49
7.6 Repetier-Host Setup_Two Color/Two Material
51
7.7 Slice_Two Color
52~53
7.8 Slice_Two Material
55~57
7.10 Repetier-Host Basic 3D Printing
70
7.11 Repetier-Host Advanced 3D Printing
71~77
18
5.7 Install camera
7.9 Printing using WIFI communication
58~69
