15
5.6.1 Take off the two filament cartridges from packaging.
5.6.2 Insert two Spool Holders into the Spool Holder Slot located at the back
of the printer and push down to lock as shown below.
(Back view of the Printer)
5.6 Install Filament
5.6.3 Mount two filament cartridges on the spool holder
NOTE: The black thumb pin and the printed“Note”must be facing front.
Spring of
Spool Holder
TM
Spool Holder
Spool Holder Slot
Black Thumb Pin
5.6.4 Remove the black thumb pin to release filaments.
NOTE: To avoid damage to the
cartridge, do not pull filament
until:
1. Black thumb pin is removed.
2. Cartridge is installed into the
printer.
