TM
6.9 Control Menu
There are 4 submenus under “Control”:
1
、
Temperature →to adjust the setting temperature.
2
、
Printer Runprama →to refer to the printer running information.
3
、
Printer Info →to refer to printer basic information.
4
、
Password→Manufacturer setup. Forbit user to adjust.
6.9.1 “Temperature” menu can set up below parameter:
Setting method: Rotate the knob to select the parameter that you want to adjust and push the
knob to confirm. Then rotate the knob to adjust the setting you want and push the knob to
confirm the number. The parameter will be run to the system.
Set up the nozzle2 setting temperature
Set up the platform setting temperature
Set up the Fan speed.
34
Set up the nozzle1 setting temperature
NOTE:
The Nozzle1 and the Nozzle2 must be adjusted
to the same temperature at the same time, or
the temperature will not be adjusted.
