TM
23
6.3 Nozzle & Filament Test
6.3.1 After calibration, the screen will show Picture K, push the LCD knob to
select the filament you are using in extruder1.
6.3.3 The nozzle will start to heat up as picture M. Once the nozzle actual
temperature reach the setting temperature as picture N, the filament
will auto load into the nozzle and flow out from the nozzle.
N
Filament Nozzle Setting Temperature
PLA
205
℃
ABS
230
℃
NOTE: the setting temperature for PLA
and ABS is different as below. Incorrect
temperature setting will result to printer
damage.
Nozzle Actual Temperature
Nozzle Setting Temperature
6.3.2 The screen will show Picture L, make sure the filament is inserted into the
printer head correctly.
L
M
NOTE: The original default testing filament
will be from Extruder1.
K
