Club Car XRT 950 2009, Руководство по техническому обслуживанию и ремонту

Страница: 46 / 256

5
Accelerator Pedal Removal – Through Early-2012 Model
Year ACCELERATOR AND BRAKE PEDAL GROUP
945
Figure 5-3 Bed Locking Pin
1023
Figure 5-4 Remove Exhaust Pipe Heat Shield
6. Detach accelerator cable extension spring(s) (Figure 5-5, Page 5-2) . See following NOTE.
NOTE: Later models have a second spring attached to a unique cable end bolt that is taller and grooved.
7. Loosen cable clamp that secures accelerator cable (Figure 5-6, Page 5-2) . This will allow additional travel so that
the cable can be disconnected at pedal.
982
Figure 5-5 Detach Accelerator Cable Extension Spring(s)
(later models have a second spring attached to tall cable
end bolt)
983
Figure 5-6 Accelerator Pedal Removal – pedal assembly
hardware
8. Remove bow-tie locking pin and washer securing each end of brake pedal pivot rod to bracket (Figure 5-7,
Page 5-3) .
Page 5-2 2009-2012 XRT 950 Maintenance and Service Manual