Club Car XRT 950 2009, Руководство по техническому обслуживанию и ремонту

Страница: 47 / 256

ACCELERATOR AND BRAKE PEDAL GROUP
Accelerator Pedal Removal – Through Early-
2012 Model Year
5
1195
Figure 5-7 Remove Bow-Tie Locking Pin and Washer
9. Remove rue pin and clevis pin securing master cylinder push rod to brake pedal (Figure 5-28, Page 5-14) .
10. Remove hardware securing the pedal group assembly to chassis (Figure 5-8, Page 5-3) and (Figure 5-9,
Page 5-3) .
1190
Figure 5-8 Accelerator Pedal Removal – pedal assembly
hardware
1191
Figure 5-9 Accelerator Pedal Removal – pedal assembly
hardware
11. With pedal group loose, maneuver it to a position that will allow the accelerator pedal return spring to be detached
from the bracket. Loosen spring retaining nut if necessary.
12. Slide accelerator pedal out of pedal group bracket.
2009-2012 XRT 950 Maintenance and Service Manual Page 5-3