Club Car XRT 950 2009, Руководство по техническому обслуживанию и ремонту

Страница: 70 / 256

6
Hydraulic and Mechanical Components BRAKES
MIN
1171
Figure 6-8 Rear Brake Hose At Master Cylinder
969
Figure 6-9 Disconnect Rear Brake Hose From Caliper
4. Remove the screws securing each brake line clamp to the rear suspension trailing arms, the front of the chassis
(Figure 6-11, Page 6-10) and the T-bracket to the park brake bracket (Figure 6-12, Page 6-10) and (Figure
6-13, Page 6-10) located under the seat.
5. Cut the wire ties securing the rear brake hoses to the rear suspension trailing arms (Figure 6-1, Page 6-6) .
6. Pull the brake hose assembly toward the rear of the vehicle, away from the master cylinder and remove.
1030
Figure 6-10 Remove Cable Clamp from Trailing Arm
968
Figure 6-11 Rear Brake Hose Clamps at Front of Chassis
972
Figure 6-12 Rear Brake Hose Routing Under Seat
996
Figure 6-13 Rear Brake Hose Tee
Page 6-10 2009-2012 XRT 950 Maintenance and Service Manual