Club Car Precedent 2014, Руководство по техническому обслуживанию и ремонту

Страница: 389 / 548

UNITIZED TRANSAXLE (GASOLINE VEHICLE) Unitized Transaxle Installation
24
1
2
3
2399
Figure 24-51 Connect Shifter Cable
565
Figure 24-52 Engine Ground Wire
23. Insert the accelerator cable through the hole in the frame and connect the accelerator cable to the pedal group
as described in Pedal Group – Gasoline Vehicle on page 5-4. Position the accelerator cable in the mounting
brackets in the vehicle base and adjust mounting nuts (1) to remove all slack in the wire portion of the cable.
Tighten mounting nuts to 23 in·lb (2.6 N·m)
(Figure 24-53, Page 24-21) .
24. Remove the 1/4-inch bolt from the fuel line and connect the fuel line to the carburetor and secure with a screw-type
hose clamp (Figure 24-54, Page 24-21) . See following NOTE. Tighten screw clamp to 9 in·lb (1.0 N·m).
NOTE: Ensure the nylon washer is in place on fuel inlet nipple prior to connecting the fuel line to the carburetor.
1
1
2398
Figure 24-53 Connect Cable
2702
Figure 24-54 Connect Fuel Line
25. Connect the impulse line to the fuel pump and secure it with the hose clamp (Figure 24-55, Page 24-22) .
26. Connect air intake hose to carburetor and secure hose clamp (Figure 24-56, Page 24-22) .
2014 Precedent ® Golf Car Maintenance and Service Manual Page 24-21