Club Car Precedent 2014, Руководство по техническому обслуживанию и ремонту

Страница: 429 / 548

IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM WITH ERIC
CHARGING Functions Menu
26
settings have been transferred to the handset, the technician can then connect the handset to another vehicle and
transfer the stored settings into the speed controller.
Speed Controller Cloning – Transferring Settings from the Vehicle to the Handset
1. Locate a vehicle that has the desired speed controller settings.
2. Turn the key switch to the OFF position, place the Forward/Reverse handle in the NEUTRAL position, and
lock the park brake.
3. Plug the handset into the vehicle.
3.1. Connect one end of the cable to the port located on the bottom of the handset.
3.2. Connect the cable adaptor to the IQDM cable.
3.3. Remove the dust cap from the IQDM port.
3.4. Align the keyed portion of the plug with the IQDM port and connect the plug to the port (Figure 26-1,
Page 26-1) .
4. Scroll to the functions menu and select.
5. Select settings .
6. Select get settings from controller .
7. Press “+” on the change value button to confirm the operation.
8. The handset will display an “executing...” message for the next few seconds while the controller settings are being
stored in the handset’s memory
(Figure 26-4, Page 26-18) .
9. When the handset is finished recording the speed controller settings, a confirmation message is displayed
(Figure 26-5, Page 26-18) .
10. With the controller settings stored in the memory of the handset, the handset can be used to transfer all of the
desired speed controller settings to any Excel System vehicle or group of Excel System vehicles. See Speed
Controller Cloning – Transferring Settings from the Handset to the Vehicle on page 26-18.
2014 Precedent ® Golf Car Maintenance and Service Manual Page 26-17