YOU MUST READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE SHELTER.
Thank you for purchasing this ClearSpan™ shelter.
When properly assembled and maintained, this product
will provide years of reliable service. This instruction
manual includes helpful hints and important information
needed to safely assemble and properly maintain the
shelter. Please read these instructions
before
you begin.
If you have any questions during the assembly, contact
Customer Service at 1-800-245-9881 for assistance.
SAFETY PRECAUTIONS
•
Wear eye protection.
•
Wear head protection.
•
Wear gloves when handling metal tubes, clamps,
and cables (if equipped).
•
Use a portable GFCI when working with power tools
and cords. Cordless power tools work best.
•
Do not climb on the shelter or framing during or after
construction.
•
Do not occupy the shelter during high winds,
tornadoes, or hurricanes.
•
Provide adequate ventilation if the structure is
enclosed.
•
Do not store hazardous materials in the shelter.
•
Provide proper ingress and egress to prevent
entrapment.
IMPORTANT: SETTING GROUND POSTS
Prior to assembling this shelter, please read the
MUST
READ
document included with the shipment.
ATTENTION:
The ground posts are designed to set four
feet (4')
below the finished grade
. Different soil types can
greatly affect the stability of the ground posts.
GROUND POSTS MUST BE ANCHORED IN PLACE
WITH CONCRETE.
Use a 24" auger to dig post holes.
CAUTION: For loose or unstable soil types or conditions,
consult local contractors for assistance before you dig
and prepare to set the ground posts.
Before beginning any construction project, consult local
and regional building codes to determine acceptable
construction practices and to identify any building
restrictions.
LOCATION
Choose the proper location before you begin. The
following suggestions and precautions will help you
select the best location.
•
Never erect the structure under power lines.
•
Identify whether underground cables and pipes are
present
before
preparing the site or digging.
•
Location should be away from structures that cause
snow to drift on or around the shelter.
•
Do not position the building in a place where large
loads such as snow and ice, large tree branches, or
other overhead obstacles could fall.
SITE
After choosing a location, proper preparation of the site
is essential. The following site characteristics will help
ensure the integrity of the structure.
•
The site must be level to properly and safely erect
the structure.
•
Drainage: Water draining off the structure and from
areas surrounding the site must drain away from the
site to prevent damage to the site, the structure, and
contents of the structure.
WARNING:
The individuals assembling this structure
are responsible for designing and furnishing all lifts,
supports, and temporary bracing required during the
assembly process.
For safety reasons, those who are
not familiar with recognized construction methods and
techniques must seek the help of a qualified contractor.
ASSEMBLY PROCEDURE
Follow the instructions as presented to ensure the
proper assembly of your shelter. Failing to follow these
steps can result in an improperly assembled and
anchored shelter. The steps outlining the assembly
process are as follows:
1. Verify that all parts are included in the shipment.
Notify Customer Service for questions or concerns.
Visit www.ClearSpan.com for additional products and customer assistance.
1 of 36
