Cisco VGD-1T3, Руководство по настройке программного обеспечения

Страница: 185 / 232

Using Cisco Unified Communications Manager to Configure RSVP Agent
Enabling the RSVP Agent on the Voice Gateway
175
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Profile Identifier: 10, Service Type: Software MTP
TCP packets rx 9, tx 6
Unsupported pkts rx 0, Unrecognized pkts rx 0
Register tx 0, successful 0, rejected 0, failed 0
KeepAlive tx 1, successful 1, failed 0
OpenReceiveChannel rx 2, successful 2, failed 0
CloseReceiveChannel rx 0, successful 0, failed 0
StartMediaTransmission rx 2, successful 2, failed 0
StopMediaTransmission rx 0, successful 0, failed 0
PortReq rx 1
PortRes tx 1, successful 1, failed 0
PortClose rx 0
QosListen rx 1
QosPath rx 1
QosTeardown rx 0, send 0, recv 0, sendrecv 0
QosResvNotify tx 2, send 2, recv 0, sendrecv 0
QosErrorNotify tx 0, send 0, recv 0, sendrecv 0
err0 0, err1 0, err2 0, err3 0, err4 0, err5 0,
err6 0, err7 0, err8 0, err9 0, err10 0, err11 0,
QosModify rx 1, send 0, recv 1, sendrecv 0
UpdateDscp rx 0
Reset rx 0, successful 0, failed 0
MediaStreamingFailure rx 0
Switchover 0, Switchback 0
Step 7
debug sccp all
Use the debug sccp all command to display the sequence of the SCCP messages. The message sequence
may be different if the RSVP policy defined in Cisco Unified Communications Manager is not set to
mandatory.
Router# show sccp statistics
Router# show log | incl (rcvd | txed)
Feb 4 20:28:41.791: sccp_parse_control_msg: rcvd KeepAliveAckMessage msg
Feb 4 20:28:41.803: sccp_parse_control_msg: rcvd KeepAliveAckMessage msg
Feb 4 20:28:41.815: sccp_parse_control_msg: rcvd KeepAliveAckMessage msg
Feb 4 20:28:55.647: sccp_parse_control_msg: rcvd PortReq msg :
Feb 4 20:28:55.647: sccp_send_port_res: PortRes msg txed in hex(including header) - len
36
Feb 4 20:28:55.651: sccp_parse_control_msg: rcvd QosPath msg:
Feb 4 20:28:55.651: sccp_parse_control_msg: rcvd QosListen msg:
Feb 4 20:28:55.675: sccp_send_qos_resv_notify: QosResvNotify txed in hex(including
header) - len 36
Feb 4 20:28:57.706: OpenReceviceChannel msg rcvd in hex -
Feb 4 20:28:57.710: sccp_open_receive_chnl_ack: OpenRecvChnlAck msg txed in hex(including
header) - len 32
Feb 4 20:28:57.714: OpenReceviceChannel msg rcvd in hex -
Feb 4 20:28:57.718: StartMediaTrans msg rcvd in hex -
Feb 4 20:28:57.726: sccp_open_receive_chnl_ack: OpenRecvChnlAck msg txed in hex(including
header) - len 32
Feb 4 20:28:57.866: StartMediaTrans msg rcvd in hex -
Feb 4 20:28:57.870: sccp_parse_control_msg: rcvd QosModify msg:
Feb 4 20:28:57.878: sccp_send_qos_resv_notify: QosResvNotify txed in hex(including
header) - len 36
Step 8
debug call rsvp-sync {events | func-trace}
Use the debug call rsvp-sync event and debug call rsvp-sync func-trace with the debug sccp all
command to show how SCCP messages and RSVP events trigger each other.
Step 9
debug voip ccapi inout