Cisco VGD-1T3, Руководство по настройке программного обеспечения

Страница: 75 / 232

Basic Configuration Using the Command-Line Interface on the Cisco VGD 1T3 Voice Gateway
Saving Configuration Changes
65
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
ip classless
ip route 0.0.0.0 0.0.0.0 172.21.101.1
no ip http server
!
!
!
line con 0
logging synchronous
transport input none
line aux 0
logging synchronous
line vty 0 4
password xyzxyzxyz
login
!
scheduler allocate 10000 400
end
Saving Configuration Changes
To prevent the loss of the gateway configuration, complete the following steps to save the configuration
to NVRAM.
Where to Go Next
At this point you can go to these references:
•
“Continuing Configuration Using the Command-Line Interface,” to continue system configuration
of basic features.
• “Managing and Troubleshooting the Voice Feature Card,” to configure, manage, and troubleshoot
voice feature card connections on your gateway.
•
Cisco Unified Communications Manager and Cisco IOS Interoperability Guide
– Release Notes for Cisco Unified Communications Manager Release 6.1.2 .
•
“Comprehensive Configuration Examples.”
• For Cisco AAA-based security information, see the Cisco AAA Implementation Case Study .
•
For troubleshooting information, see the System Error Messages and Debug Command Reference
publications.
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, the Cisco logo, DCE, and Welcome to the
Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar,
Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified
Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration
Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient,
IOS, iPhone, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone,
Command Purpose
Step 1
Router> enable
Enters privileged EXEC mode.
Step 2
Router# copy running-config startup-config
Saves the configuration changes to NVRAM so
that they are not lost during resets, power cycles,
or power outages.
Step 3
Router(config-if)# Ctrl-Z
Returns to privileged EXEC mode.