Cisco VGD-1T3, Руководство по настройке программного обеспечения

Страница: 91 / 232

Configuring and Managing the High-Density Packet Voice Feature Card
Verifying and Troubleshooting the High-Density Packet VFC
81
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
DSP# State Complexity Resets State Type
3/1 ACTIVE FLEXI 0 a_______ ________ v_______ ________
3/2 B-OUT FLEXI 0 bbbbbbbb bbbbbbbb ________ ________
3/3 OOS FLEXI 0 ssssssss ssssssss ________ ________
3/4 ACTIVE FLEXI 1 ________ ________ ________ ________
3/5 ACTIVE FLEXI 0 ________ ________ ________ ________
3/6 ACTIVE FLEXI 0 ________ ________ ________ ________
3/7 ACTIVE FLEXI 0 ________ ________ ________ ________
3/8 ACTIVE FLEXI 0 ________ ________ ________ ________
3/9 ACTIVE FLEXI 0 ________ ________ ________ ________
3/10 ACTIVE FLEXI 0 ________ ________ ________ ________
3/11 ACTIVE FLEXI 0 ________ ________ ________ ________
3/12 ACTIVE FLEXI 0 ________ ________ ________ ________
3/13 ACTIVE FLEXI 0 ________ ________ ________ ________
3/14 ACTIVE FLEXI 0 ________ ________ ________ ________
3/15 ACTIVE FLEXI 0 ________ ________ ________ ________
3/16 ACTIVE FLEXI 0 ________ ________ ________ ________
4/5 ACTIVE FLEXI 0 ________ ________ ________ ________
4/6 ACTIVE FLEXI 0 ________ ________ ________ ________
4/7 ACTIVE FLEXI 0 ________ ________ ________ ________
4/8 ACTIVE FLEXI 0 ________ ________ ________ ________
4/9 ACTIVE FLEXI 0 ________ ________ ________ ________
.
.
.
Step 3 show voice hpi capture
In the following example, the show voice hpi capture command is used in privileged EXEC mode to
check on the status of the logger before, during, and after configuration:
Router# show voice hpi capture
HPI Capture is on and is logging to URL ftp://10.23.184.216/d:\test_data.dat
1 messages sent to URL, 0 messages dropped
Message Buffer (total:inuse:free) 2134:0000:2134Buffer
Memory:699952 bytes, Message size:328 bytes
Step 4
show call active fax
The following is sample output from the command that shows no fax activity on the router:
Router# show call active fax
Telephony call-legs: 0
SIP call-legs: 0
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Total call-legs: 0
Step 5 show call active voice
The following is sample output from the command that shows statistics for active voice calls on the
router:
Router# show call active voice
GENERIC:
SetupTime=94523746 ms
Index=448
PeerAddress=##73072