Cisco VGD-1T3, Руководство по настройке программного обеспечения

Страница: 179 / 232

Using Cisco Unified Communications Manager to Configure RSVP Agent
Enabling the RSVP Agent on the Voice Gateway
169
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
Figure 1 RSVP Agent in Cisco Unified Communications Manager Meshed Network
To support video calls, MTP and transcoding resources can process multiple streams in a single session,
including audio, video and data, one-way or two-way, using a pass-through mode. In pass-through mode,
a SCCP device processes streams using a pure software MTP, regardless of the type of stream, so it can
be used for any stream type. Video and data streams are processed using pass-through mode. Audio
streams can be processed with or without pass-through mode.
Enabling the RSVP Agent on the Voice Gateway
This section contains the following procedures:
•
Enabling RSVP in a DSP Farm Profile, page 169 (required)
• Verifying RSVP Agent Configuration, page 171 (optional)
•
Troubleshooting the RSVP Agent, page 172 (optional)
Enabling RSVP in a DSP Farm Profile
Perform this procedure to enable the RSVP agent on an MTP or transcoder device.
SUMMARY STEPS
1.
enable
2. configure terminal
3.
dspfarm profile profile-identifier {mtp | transcode}
4. codec pass-through
5.
maximum sessions number
or
maximum sessions {hardware | software} number
6. associate application sccp
V
V
V
IP
IP IP
IP IP
RSVP agent RSVP agent
IP phones PC video
RSVP agent
Cisco Unified CallManager
127438
M