IP Configuration: SLA
Using SLA
419
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
19
•
Delay—
When the result of an IP SLA operation indicates that the state of the tracking
object should change to X from Y, the tracking object performs the following actions:
-
The state of the tracking object is not changed and the tracking object starts the
delay timer for the interval.
-
If during the time that the timer is set, the original state (Y) is received again, the
timer is canceled, and the state remains Y.
-
If the delay timer is expired, the state of the tracking object is changed to X and the
X state is passed to the associated applications.
Using SLA
ICMP-Echo Operations
IP SLA ICMP-Echo operations can be configured in this page. These operations will be
executed according to the frequency entered.
STEP 1
Click
IP Configuration
>
IPv4 Management and Interfaces > SLA > ICMP-Echo
Operations
.
The ICMP-Echo operations are displayed (some fields described in the
Add
page):
•
State
—Displays either Pending or Scheduled, as described in the Overview above.
•
Return Code
—Displays either OK or Error, as described in the Overview above.
STEP 2
To add a new operation, click
Add
.
STEP 3
Enter the following fields:
•
Operation Number
—Enter an unused number.
•
Operation State
—Select one of the following options:
-
Pending
—Operation is not activated.
-
Scheduled
—Operation is activated.
ICMP-Echo Parameters
•
Operation Target
—Select how the operation target is defined:
-
By IP
—Enter the operation target’s IP address.
