Cisco SF550X-24, Руководство администратора

Страница: 104 / 725

Administration: File Management
Firmware Operations
77 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
6
• (Backup) Destination —Enter the name of the backup file.
STEP 3
Click Apply to begin the operation.
To update/backup firmware using SCP:
STEP 1
Click Administration > File Management > Firmware Operations .
The following fields are displayed:
• Active Firmware File —Displays the current, active firmware file.
• Active Firmware Version —Displays the version of the current, active firmware file.
STEP 2
Enter the following fields:
• Operation Type —Select Update Firmware or Backup Firmware .
• Copy Method —Select SCP .
STEP 3
To enable SSH server authentication (which is disabled by default), click Edit by Remote
SSH Server Authentication . This takes you to the SSH Server Authentication page to
configure the SSH server
STEP 4
Return to this page.
STEP 5
Select one of the following methods to perform SSH Client Authentication :
• Use SSH Client System Credentials— Sets permanent SSH user credentials. Click
System Credentials to go to the SSH User Authentication page where the user/
password can be set once for all future use.
• Use SSH Client One-Time Credentials— Enter the following:
- Username —Enter a username for this copy action.
- Password —Enter a password for this copy.
NOTE
The username and password for one-time credential will not saved in
configuration file.
STEP 6
Enter the following fields:
• Server Definition —Select whether to specify the SCP server by IP address or by
domain name.