Cisco SF550X-24, Руководство администратора

Страница: 38 / 725

Configuration Wizards
Getting Started Wizard
31 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
3
STEP 5
Enter the fields:
• Interface —Select the IP interface for the system.
• IP Interface Source —Select one of the following options:
- DHCP —Select for the device to receive its IP address from a DHCP server.
- Static —Select to enter the IP address of the device manually.
If you selected Static as the IP address type, enter the following fields:
• IP Address —IP address of the interface.
• Network Mask —IP mask for this address.
• Administrative Default Gateway —Enter the default gateway IP address.
• DNS Server —Enter the IP address of the DNS server.
STEP 6
Click Next
STEP 7
Enter the fields:
• Username —Enter a new user name between 0 and 20 characters. UTF-8 characters are
not permitted.
• Password —Enter a password (UTF-8 characters are not permitted). If the password
strength and complexity is defined, the user password must comply with the policy
configured in
Password Strength .
• Confirm Password —Enter the password again.
• Password Strength —Displays the strength of password. The policy for password
strength and complexity are configured in the Password Strength page.
• Keep current username and password —Select to keep current username and
password.
STEP 8
Click Next
STEP 9
Enter the fields:
• Clock Source —Select one of the following:
- Manual Settings —Select to enter the device system time. If this is selected, enter the
Date and Time .
- Default SNTP Servers —Select to use the default SNTP servers.